Key moments (11)
0:00 LSA First for HVAC Paid Search
0:21 LSA vs Google Ads Core Difference
0:52 How Google Search Ads Actually Work
1:25 Cost Per Lead Benchmarks Compared
2:08 Why LSA Converts at Lower Cost
2:52 Requirements to Go Live with LSA
3:35 Where Google Search Ads Fill the Gaps
5:00 The Right Sequencing Strategy
5:57 Side-by-Side Budget Comparison
6:37 Five Common LSA Mistakes
7:41 Pre-Launch Checklist Before Spending

Run LSA first. If you are an HVACs company that is new to paid search, local services ads as your starting point, not Google search ads.

This is part of our guide to Local paid search marketing. Want it done for you? See our Google Ads management services.

Read the full written guide: Complete HVAC SEO Blueprint: Driving Leads Through Search

Full transcript

0:00 LSA First for HVAC Paid Search
Run LSA first. If you are an HVACs company that is new to paid search, local services ads as your starting point, not Google search ads. That is the short answer. Now let me show you exactly why, when to flip the switch and how to run both together without wasting money.

0:21 LSA vs Google Ads Core Difference
Most contractors hear LSA and think it is just another ad type. It is not. Local Services Ads live above everything else on the results page, above paper click ads, above the map pack, above organic results. You pay per lead, not per click. Someone calls you or messages you through the ad, you pay. Someone clicks and bounces, you pay nothing. That is a fundamental difference from how Google search ads work.

0:52 How Google Search Ads Actually Work
Google search ads, what most people call paper click, work differently. You choose keywords, you write ad copy, you set bids, someone searches AC repair near me, your ad shows up, they click. You pay for that click whether they call you or not, whether they book or not, whether they even read your page or not. You are buying traffic with LSA, you are buying leads. That distinction matters a lot when you are deciding where to put your first dollar.

1:25 Cost Per Lead Benchmarks Compared
Here is where the numbers make the case clearly. According to Anthony Lewis Media’s 2026 benchmarks, HVAC LSA leads run $45 to $85 per lead. Nonbranded Google search ad leads for HVAC run $120 to $180 per lead. That is roughly a two to one cost difference on the low end and more than two to one on the high end. For a company booking 10 leads a month, that gap adds up fast. Now those are benchmarks not guarantees. Your numbers will move based on your market, your close rate, and how well your profile is set up. But the direction is consistent. LSA leads costs less than search ad leads in most HVAC markets.

2:08 Why LSA Converts at Lower Cost
The mechanism is not magic. It is trust and intent stacked together. First, the Google guaranteed badge. To run LSA’s, you go through a background and license check. Google puts its badge on your ads. That badge signals legitimacy to the person searching. Second, the person calling through an LSA is already further along. They are not browsing options. They saw your name, your rating, your review count, and they tapped call. Lower friction, higher intent, better conversion rate. Higher conversion rate means your cost per booked job drops even further beyond just the lead cost difference.

2:52 Requirements to Go Live with LSA
LSA is built for local service businesses with a physical service area. HVAC is just about the perfect category for it. You need a Google Business Profile that is verified and in good shape. You need a Google guaranteed or Google screen check completed. You need reviews with at least 10 being a good starting point. You also need a solid average rating on those reviews. You need your license and insurance papers ready to send in. If you have those things, you can be live with LSA in a matter of days. Sometimes it happens even faster than that. The lower setup cost and faster start time is one more reason to begin here. Start here before you ever touch search ads.

3:35 Where Google Search Ads Fill the Gaps
LSA is not unlimited. The budget controls are blunt compared to search ads. You tell Google roughly how many leads you want per week and it spends toward that. You do not control bids the way you do in search campaigns. You cannot target specific keywords. You cannot write detailed ad copy. You cannot run ads for equipment sales, maintenance contracts, or commercial work in the same straightforward way. If you want to push a specific service, say new system installs, or target a zip code with unusual precision, LSA does not give you those levers. That is where search ads come in. Google search ads give you control. You can build a campaign around emergency furnace repair and nothing else. You can exclude zip codes, run ads only on weekdays between 6am and 9pm, and pay more per click during the hours your competitors go dark. You can write a headline that speaks directly to the person’s exact situation. You can send them to a landing page built for one specific offer. You can track form fills, calls, and revenue back to the keyword that started it. That granularity is powerful. It is also why search ads require more setup time, more ongoing management, and why the cost per lead is higher. You are paying for all that precision plus the clicks that do not convert.

5:00 The Right Sequencing Strategy
So here is the sequence that makes sense for most HVAC companies. Start with LSA. Get your Google Business Profile fully optimized and verified. Complete Google guaranteed verification. Build your review count. Turn LSA on and run it for 60 to 90 days. Learn what services are generating calls. Learn your actual cost per lead in your specific market. Then once LSA is running and generating leads at a cost that works layer in Google search ads for gaps, maybe LSA is not generating enough install leads. Maybe you want to attack a neighboring city. Maybe you want to run a seasonal promotion. Those are the situations where search ads earn their higher cost. You are not choosing one forever. You are sequencing them in the order that gets you leads at the lowest cost first, then adding precision when you need it.

5:57 Side-by-Side Budget Comparison
Picture a company doing about 15 paid leads a month. Say you run those 15 leads through LSA at the Anthony Lewis Media benchmark midpoint, call it $65 a lead. That is $975 a month. Now say you tried to get the same 15 leads through non -branded search ads at the benchmark midpoint, call it $150 a lead. That is $2,250 a month. The gap is over $1,200 a month on the same number of leads. That is money you either keep or reinvest into search ads once LSA is established. That is why the sequence matters.

6:37 Five Common LSA Mistakes
Mistake one, running search ads before LSA is set up. You pay premium prices for leads you could have gotten cheaper. Mistake two, launching LSA with a thin Google Business Profile. Your profile shows low review counts, weak service descriptions, and you lose the auction to competitors with better profiles. Mistake three, disputing every lead. LSA does let you dispute leads that are clearly wrong numbers or out -of -service area calls, but companies that over dispute train the system to show their ads less. Dispute only the genuinely invalid ones. Mistake four, pausing LSA the second it slows down in fall. Seasonal fluctuation is normal. Going dark means you lose ranking momentum and ramp back up slower when demand spikes again. Mistake five, running both platforms without tracking attribution. If you do not know which platform booked which job you cannot optimize either one, get call tracking set up before you spend a dollar on either platform.

7:41 Pre-Launch Checklist Before Spending
Before you turn on LSA search categories and service areas, do you have at least 10 reviews with an average above four stars? Is your license and insurance current and uploadable? Do you have a landing page that loads fast on mobile and has a click to call button above the fold? Do you have call tracking in place? If any of those is a no, fix it first. Paid ads amplify what is already there. If what is there is weak, you will spend money on leads your profile or landing page cannot close. Ask yourself three questions. Do you have a verified Google Business Profile with 10 or more reviews? Do you have your license and insurance ready? Do you have a service area that qualifies for Google guaranteed? If the answer to all three is yes, start LSA this week. If the answer to any of them is no, work on those before anything else. Search ads come after LSA is running and you know your real cost per lead, not before. If you want to know how your HVAC company looks right now across Google search, the map pack and AI results, get your free AI visibility check. Go to PushLeads.com slash check or call 828 -348 -7686. It is free. It is fast and it will show you exactly where you stand before you commit a dollar to paid ads.

← All PushLeads videos


Want more customers from Google & AI search?

Get a free SEO audit of your site — see exactly what to fix first.

Get My Free Audit Book a Call